; MIDI Director Port Setup File
;
; Port = default int, default port, default extra, Port Name
[Ports]
MPU_DRV.DLL= 2, 330, 0, MPU-401 driver
MQX_DRV.DLL= 2, 330, 0, MQX-16S or MQX-32M
KEY_DRV.DLL= 4, 3F8, 4, Key MIDIATOR Driver
CMS_444.DLL= 2, 330, 4, CMS-444 Driver
CMS_4012.DLL= 2, 330, 7, CMS-401-II Driver
MTP_DRV.DLL= 7, 240, 1, MIDI Time Piece
MPCDEMO.DLL= 999, 0, 0, MultiMedia Ext. Interface

[Descriptions]
MPU_DRV.DLL=Sensing is enabled when set to 0 disabled when set to 1. Internal SMPTE conversion cannot be used with this driver.
MQX_DRV.DLL=Select this Driver to use internal SMPTE/MTC on Music Quest MQX cards.
KEY_DRV.DLL=Set the delay factor to 1 for 286 or 6 for fast 386 systems. Use interrupt=3, port=2F8 for use on COM2.
CMS_444.DLL=This driver supports all four ports of the CMS-444. 
CMS_4012.DLL=Secondary interrupt may be set to the same as the primary interrupt.
MTP_DRV.DLL=Be sure to set the number of units to 1 or 2.
MPCDEMO.DLL=None of the Settings have any affect. Just select Ok or Cancel.

[ExtraTitle]
MPU_DRV.DLL=Music Quest Sensing
MQX_DRV.DLL=Parameter Not used
KEY_DRV.DLL=Delay factor
CMS_444.DLL=Number of Ports
CMS_4012.DLL=Port 2 interrupt
MTP_DRV.DLL=Units
MPCDEMO.DLL=Not Used

